ELECTRON BEAM MELTING (EBM)
The process of creating the part is carried out in a vacuum working chamber at a temperature of approximately 700-900ᵒC.
Thanks to this, the parts created during the process have no internal stresses and the properties obtained are superior to those that can be obtained in a foundry.
TECHNICAL SPECIFICATIONS
| Minimum wall thickness | 1 mm |
| Minimal detail to be reproduced | 0,6 mm |
| Precision | 0,3% (min +/- 0,25) |
| Maximum part size | 210 * 210 * 210 mm |
| Layer thickness | 0,050 mm |
CUSTOMISE YOUR PIECES
If you wish to include customised texts in your EBM pieces, please follow our recommendations.
If the text is to be engraved internally, higher print parameters must be set.
Embossed text
hmin 0,8 mm emin 0,5 mm Hmin 0,8 mm
Engraved text
hmin 1 ,6 mm emin 1,2 mm Hmin 4,5 mm
SUPPORT OPTIMISATION
In the Direct Metal Laser Sintering technology it is necessary to build supports that help sustain the piece and transmit the heat provided to the base. The technical team of the project will be in charge of removing them.
Interesting articles
Additive Manufacturing, More than a Technology
Additive manufacturing or manufacture by addition encompasses various technologies that manufacture three-dimensional objects by sequentially adding layers of material.
Selective Laser Sintering, a Versatile and Functional Technique
SLS technology is an additive manufacturing technology that uses a laser to sinter small particles of polymer powder into a solid structure based on a 3D model.