SELECTIVE LASER SINTERING (SLS)
TOLERANCE OF MOVING PARTS
This technology makes it possible to create machine-assembled parts, as well as to manufacture parts inside each other.
|Minimum wall thickness||0,8 – 1 mm|
|Minimal detail to be reproduced||0.3 mm|
|Precisión||0.1% (min +/- 0,2)|
|Maximum part size||340 * 340 * 600 mm|
|Layer thickness||0.120 mm|
CUSTOMISE YOUR PIECES
If you want to include personalised texts in your SLS pieces, we advise you to follow our recommendations.
If you want the text engraved inwards, the parameters must be higher in order to obtain the desired result.
hmin 1 mm emin 1,2 mm Hmin 3,5 mm
hmin 1 ,6 mm emin 1,2 mm Hmin 4,5 mm
Maximum part size is 340x340x600 mm. However, it is still possible to produce larger parts. To do this, the workpiece is divided into parts which are then bonded together.
The final result guarantees the correct joining of the parts.
Several weeks ago we told you about the Polyjet manufacturing technique and explained that it is a technology that allows us to create very precise, smooth, complex and even colourful models. This fundamental feature would be its high quality finishes. Today we will...
Additive manufacturing is gaining significant ground in the automotive industry, due to the potential it offers to create new designs through prototyping. Thanks to the technological breakthroughs this method is enabling, end-use parts are now beginning...
We can't say it enough: additive manufacturing is on the rise. And new technologies continue to emerge thanks to its great innovative and evolving nature. Previous articles explained the PBF and FDM technologies and this time we shall look at the technology known as...