en
es fr

Who we are

Capabilities

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest

We select and control all manufacturing parameters from our headquarters

We have machinery for electron beam melting (EBM), direct metal laser sintering (DMLS), selective laser sintering (SLS), fused deposition modeling (FDM), as well as finishing processed and parts cleaning.

Electron beam melting (EBM)

Electron beam melting (EBM)

Manufacturing through electron beam melting with a ARCAM Q10.

  • Measurements: 200 x 200 x 180mm
  • Materials: Titanium alloys Ti6Al4VELI (Grado 23)
  • Other materials: Ti6Al4V (Grado 5), Ti-Grado 2, Cromo-Cobalto (CoCr-ASTM F75)
  • Tolerance: Accuracy: 0.3%(min.+/-0,25)
    Minimum thickness: 2 mm
Direct metal laser sintering (DMLS)

Direct metal laser sintering (DMLS)

Manufacturing though metallic alloys laser sintering with a EOS M290.

  • Measurements: 250 x 250 x 300mm
  • Materials: Nickel based alloys (Inconel 718)
  • Other materials: Ti6Al4V, AlSl10Mg, Cromo-Cobalto (MP1, SP2), Acero martensitico MS1, INCO625 y Ni HX
  • Tolerance: Accuracy: 0,1% (min.+/-0,2)
    Minimum thickness: 0,8 mm
Selective laser sintering (SLS)

Selective laser sintering (SLS)

Production through polymers elective laser sintering with a EOS P396.

  • Measurements: 350 x 350 x 600mm
  • Materials: 12 white polyamide
  • Other materials: Natural or black polyamide 12
    Translucide polyamide 11
    Polyestiren
  • Tolerance: Accuracy: 0,1% (min +/-0,1)
    Minimum thickness: 0,3 mm
Fused deposition modeling (FDM)

Fused deposition modeling (FDM)

Manufacturing through plastics fused deposition modeling at a Fortus 400 and Fortus 900.

  • Fortus 400 measurements: 406 x 355 x 406mm
  • Fortus 900 measurements: 914 x 610 x 914mm
  • Materials: ASA, ABS (ABS i, ABS M30, ABS M30i, ESD7)
    PC, PC-ABS Y PC-ISO
    ULTEM 9085
    ULTEM 1010
    PPSF
    Nylon 12
  • Tolerance Accuracy: 0,1% (min+/- 0,13)
    Minimum thickness: 0,5 mm
Material Jetting

Material Jetting

We use the Objet 500 Connex3 to produce components through material jetting.

  • Diversity of colours and transparency
    Elastomers with different thickness (27-95 ShoreA)
    PP and ABS simulation
  • Measurements: 490x390x200mm
  • Tolerance: Accuracy: 0,2 (min. 20µm)
    Minimum thickness: 0,5-0,8 mm
Finishing and cleaning processes

Finishing and cleaning processes

We carry out the necessary additional processes to complete the parts’ manufacturing. Apart from a specific manual cleaning and decontamination we carry on validation processes to guarantee the highest quality standard which will allow our clients the component’s sterilization before use.

  • Finishing processes: - Shot Peening through steel or glass bed.
    - Corundum blasting.
    - Polishing through various abrasives.
    - Verification.
  • Cleaning processes: - Rinse and preliminary cleaning
    - Heated bathrooms through ultrasonic vibrations.
    - Water baths on running or demineralized water.